How TO filter water at home simply and easily

Water is one of the most basic necessities of life, where people can live a week or more without food, but can live only 2 to 3 days without water. Clean water can be hard to find it, and that the water supply be able by a large bug that can make you seriously ill. In this article I will tell you a simple and easy ways to help you work to filter and purify water.

Action filter water at home

1 multi-level filtering the number of filters:

Step 1: Bring at least 2 two pots of water, and the container used for the development of the non-filtered water and other container to collect water after filtered and the other should only be used to filter the water. If you have more than two pots, you can use another pot a filter.

Step 2 : the work of small holes in the bottom of the filter bowl. These holes should allow for the passage of filtered water that has been filtered, but not for the passage of impurities.

Step 3: Put the factors and filter materials, and these materials can vary in the way and put it includes several good materials such as small rocks or gravel, coal, sand, grass or cotton clothing.

Step 4: crush coal cutting through the hammer until they become very small pieces.

Step 5: materials are arranged according to different particle size so that the order to begin classes in the largest piece of the pieces, and then finally the smallest younger. An example of this begin to develop layers of gravel or rocks first, followed by the sand and coal seams and ends of cotton filters to catch smaller particles of impurities.

Step 6: Pour the water filter in the filter and allow the water to pass through the holes to the other vessel. You may need to pour water on several occasions.

2 filter of a single layer

Step 1: Get several containers or bottles. Will be one filter and the other pot are recipients of the filtered water.

Step 2: Make a hole in the bottle cap if there is no cap to the bottle, the work of several holes in the bottom of the pot.

Step 3: Put a piece of cotton or coffee filter through this hole so as not to fall substances and impurities during the filtered water.

Step 4: sand or coal put on cotton layer until it is filled to the middle of the bottle then put another piece of cotton on top of this layer so as not to pass any impurities with water.

Step 5: Pour the water slowly in the bottle and put another bottle from the bottom of the filter until the drained water and allow the passage of water collection and can slowly refining the filter as needed.

3 filter cloth

Step 1: Connect a piece of clothing or cloth on the nozzle of the bottle and Chpetha through the gum. If you do not have gum simply the work of a node from the same cloth user.

Step 2: stir the pot and water is poured through the cloth.

4 liquidation padding:

It is very possible to make a pillow if you need to filter the water in the house after the state of emergency or you're out for a walk for long distances.

Step 1: Cut a plastic bottle from the middle.

Step 2: Using the lower part filled padding filler.

Step 3: Put the sand in the middle.

Step 4: Put the rocks on top.

Step 5: Pour the water from which to filter the water. You can see that the water has become clearer than ever before.